Before installing the spotlight must make appropriate holes in the suspended plasterboard ceiling. To maintain symmetry and to arrange the correct lighting it is desirable to make a marking, which will determine the number and location of spotlights. With the building rule or a long water level and a pencil marked diagonal lines, where the center of the ceiling will be found. By the way now enjoys the popularity of paving stones in the repair of its use by many.
By fixing a metal “crown” in an electric drill, the required number of holes are drilled. The diameter of the “core” should be equal to the diameter of the inside of the lamp, and the outer side will cover the drilled hole. When connecting the lamps ends of wires stripped and stranded wire twisted to give rigidity. Use a screwdriver to loosen the clamping screws of the terminals to which the conductors are connected. Screws are tightened for reliable contact. The spring mounts of the luminaire should be firmly pressed to the body of the luminaire. At the same time, a light is shoved into the hole as far as it will go. The luminaire will be considered fixed when the springs open. At the end there is a bulb screwed in.