When pasting with wallpaper of any ceiling areas, a prerequisite is the preparation of surfaces. In this case, all previous coatings should be thoroughly removed and aligned. This can be done using starting and finish putty and primer. The entire ceiling zone must be twice covered with a primer mixture. After its complete drying, you can start putty work. Having achieved a perfectly flat surface, you should give putty time to dry. Only after complete preparation can you begin the process of gluing wallpaper. At your leisure you can have fun with free dressing games.
Currently, there is a huge selection of wallpaper, but preference should be given to wallpaper with good moisture resistance and amenable to wet cleaning. For pasting ceiling zones, the use of non -woven or vinyl wallpaper is most often recommended. The color scheme should have compliance with the general interior of the room. Having chosen vinyl or non -woven wallpaper, you need to buy a special glue for them. Pashing the ceiling zones occurs according to the same principle as pasting walls. After the pasting is completed, you should cut out all the protruding edges and close them around the perimeter with ceiling skirting boards.