Features of the masonry of the chimney

Bond pipes, as you know, are divided into indigenous and nozzle. Dungeons are installed directly on the heating device, the indigenous ones require the device of a special foundation.

A brick is necessary for the construction of a root pipe. True, today these pipes are often made from asbestos -cement materials. But in this case, the pipe must be isolated with a special material. Otherwise, condensation will form on its walls, which can lead to the destruction of the masonry of the entire furnace.

A reinforced concrete vibropopylet is well suited as the foundation for the pipe. Its shape directly depends on the shape of the pipe. A seizure is made in the stove for installing a chimney. On the sides of the plate, it is recommended to make special sides forming a rubble. Between the stove and the rubble should remain the gaps that are filled with non -combustible materials.

For each furnace, the cross section of the chimneys is of great importance and their location in the house. The cross -sectional size of 20 by 20 cm will be optimal. Chimmers are often arranged in the inner walls of the house. At the same time, it is not recommended to lay them in the corners and in places of intersection of the walls. It is not advisable to have chimneys in the external walls. As a result of contact with the cold air of the street, they will quickly lose heat.